Safety
First...
Firstly, and most importantly, here are some safety issues to consider before
using your candles:
-
Never leave a burning candle unattended.
-
Never place a burning candle near something flammable.
-
Keep burning candles out of reach of children and pets.
-
Always place your candle on a heat-resistant, flameproof
surface before lighting it.
-
Use caution when blowing out your candle. Blowing with force
could cause the melted wax to splatter. For safest results, extinguish your
candle using a candlesnuffer.
-
To prevent smoking, trim wick to ¼ inch
prior to each use and keep trimmed.
More Candle Care
Tips...
-
Burning candles close together in groups will affect the burn time and quality
of the burn because the heat generated by the candles will cause rapid melting
and softening of the wax.
-
Remove any bits of wick or other foreign matter
from the pool of melted wax after extinguishing your candle.
-
Extinguish
taper or pillar candles when they get within 2" of their holders.
-
Burn away from draughts. This can cause uneven burning of your candle.
-
Always use containers that have been made for candle usage.
-
Discontinue
use of a container candle when ½" of wax remains.
-
And finally, aged beeswax candles burn even longer than freshly made ones. Keep
some candles stored away to burn at a later date if possible.
Taking Care of your
Candles...All candles from Brighter Blessings are handmade using the
finest beeswax, herbs and essential oils. When burning our
candles, there are a few things to consider helping maintain
their beauty and extend their life.
The first time you
burn a candle, allow it to burn until the melted wax (also
known as "The melt pool") covers the top of the candle. In
further lightings, keep the burning time down to a maximum of
three or four hours. This insures a clean, efficient burning
cycle for the life of the candle, and also guards against
over-perfuming and smoking of the candle. If smoking does
occur, extinguish your candle (remember – don’t blow!) by
pressing the wick into the wax, and then repositioning the
wick. Wait for your candle to cool, and then re-trim to ¼
inch.
Disclaimer...
Brighter Blessings is not responsible for any injuries,
damages or losses of any kind due to lack of attention or
proper candle burning safety while enjoying our products. Our
maximum liability to you is the purchase amount of your
candles plus shipping cost you paid. Your purchase from
Brighter Blessings signifies acceptance of our information,
policies and guidelines for candle
burning. |